{"product_id":"zwiebel-regrower-fuer-glaeser-3d-gedruckter-hydroponik-halter-5-pflanzplaetze","title":"Onion Regrower for Jars – 3D-Printed Hydroponic Holder | 5 Planting Slots","description":"\u003cp\u003e🌱 Regrow spring onions easily!\u003c\/p\u003e\n\u003cp\u003eThis 3D-printed onion regrower transforms a suitable glass or container into a small hydroponic station for your windowsill.\u003c\/p\u003e\n\u003cp\u003eWith 1 large and 4 small planting baskets, you can plant several onion bases at the same time – without any soil.\u003c\/p\u003e\n\u003cp\u003eSuitable for round container openings with an inner diameter of approx. 68–86 mm.\u003c\/p\u003e\n\u003cp\u003eGlass, plants and decorations are not included.\u003c\/p\u003e\n\u003cp\u003eWhy throw away spring onions after using them once?\u003c\/p\u003e\n\u003cp\u003eWith this practical regrower, you can place suitable onion bases in water and watch them regrow.\u003c\/p\u003e\n\u003cp\u003eThe regrower simply sits on top of a suitable glass. The roots grow through the openings in the planting baskets towards the water.\u003c\/p\u003e\n\u003cp\u003e🌱 5 planting spots\u003c\/p\u003e\n\u003cp\u003eThe regrower features:\u003cbr\u003e1 large planting basket for a larger onion base\u003cbr\u003e4 smaller planting baskets for spring onions and similar plant bases\u003c\/p\u003e\n\u003cp\u003eThe small baskets are arranged in a space-saving arc.\u003c\/p\u003e\n\u003cp\u003eThree integrated fastening tabs also allow it to be secured with a suitable rubber band or cord.\u003c\/p\u003e\n\u003cp\u003e✨ PRODUCT FEATURES\u003c\/p\u003e\n\u003cp\u003eFinished 3D-printed physical product\u003cbr\u003e1 large planting basket\u003cbr\u003e4 small planting baskets\u003cbr\u003e5 planting spots in total\u003cbr\u003eWater, root and drainage holes\u003cbr\u003eHemispherical basket bottoms\u003cbr\u003e3 integrated fastening tabs\u003cbr\u003eMounting hole with Ø 5 mm each\u003c\/p\u003e\n\u003cp\u003eNo assembly required\u003cbr\u003eReusable\u003cbr\u003eSpace-saving design\u003cbr\u003eIdeal for the kitchen and windowsill\u003cbr\u003e3D-printed in Hamburg\u003c\/p\u003e\n\u003cp\u003eGlass or container not included\u003c\/p\u003e\n\u003cp\u003e📏 DIMENSIONS\u003cbr\u003eTop plate: Ø 90 mmOverall dimensions incl. tabs: approx. 105.5 × 105 mmOverall height: approx. 40 mm\u003cbr\u003eLarge opening: Ø 36 mmLarge planting basket exterior: Ø 40 mm\u003c\/p\u003e\n\u003cp\u003eSmall openings: Ø 15 mm eachSmall planting baskets exterior: Ø 18 mm each\u003cbr\u003eMounting holes: Ø 5 mm\u003cbr\u003eRecommended container opening:\u003cbr\u003eØ 68–86 mm inner diameter\u003cbr\u003eSlight dimensional deviations may occur due to production.\u003c\/p\u003e\n\u003cp\u003e🫙 WILL MY GLASS FIT?\u003cbr\u003ePlease measure the inner diameter of the actual glass opening before ordering.\u003cbr\u003eRecommended: 68–86 mm inner diameter\u003c\/p\u003e\n\u003cp\u003eThe opening must be large enough for the planting baskets to fit into the container. At the same time, it must be smaller than the 90 mm top plate so that the regrower rests securely on the rim.\u003c\/p\u003e\n\u003cp\u003e⚠️ Important: Manufacturers' specifications for drinking glasses and storage jars often refer to the outer diameter rather than the actual inner opening.\u003cbr\u003eDue to different glass shapes, rim thicknesses and tapers, we cannot guarantee universal compatibility with every glass or specific glass series.\u003cbr\u003ePlease measure again before ordering.\u003c\/p\u003e\n\u003cp\u003e🌱 HOW IT WORKS\u003cbr\u003eMeasure the inner diameter of your glass.\u003cbr\u003eFill the glass with fresh water.\u003cbr\u003ePlace the regrower completely on the rim of the glass.\u003cbr\u003eCheck that it rests stably and level.\u003cbr\u003eIf necessary, secure it additionally using the tabs.\u003cbr\u003eCarefully place the onion bases in the appropriate baskets.\u003cbr\u003eMake sure that the existing roots reach the water.\u003cbr\u003eChange the water regularly.\u003cbr\u003eLet it grow! 🌱\u003c\/p\u003e\n\u003cp\u003e🖨️ MATERIAL \u0026amp; PRODUCTION\u003cbr\u003eMaterial: PLA (Polylactic acid)\u003cbr\u003eProduction method: 3D printing\u003cbr\u003ePlace of production: Hamburg, Germany\u003cbr\u003eEach onion regrower is produced individually using the 3D printing process.\u003c\/p\u003e\n\u003cp\u003eFine visible layer lines, small starting points and slight differences in surface or color are typical features of 3D printing and do not generally constitute a product defect.\u003c\/p\u003e\n\u003cp\u003eNote on food contact\u003cbr\u003eThis product is not offered as food-safe or certified for direct contact with food.\u003cbr\u003eIt serves as a plant holder over a water container and not as a drinking vessel, tableware or container for storing food.\u003c\/p\u003e\n\u003cp\u003eCare instructions for PLA\u003cbr\u003ePLA can deform at higher temperatures. Therefore, please:\u003cbr\u003eClean by hand with lukewarm water only\u003cbr\u003eDo not clean in the dishwasher\u003cbr\u003eDo not use boiling or very hot water\u003cbr\u003eDo not place on or directly next to a heater, stove or other heat source\u003cbr\u003eDo not expose to intense heat for extended periods\u003c\/p\u003e\n\u003cp\u003e⚠️ SAFETY INSTRUCTIONS\u003cbr\u003eNot a toy\u003cbr\u003eKeep away from small children and pets\u003cbr\u003eWhen children are caring for plants, use only under adult supervision\u003cbr\u003eCheck that it sits securely on the container before each use\u003cbr\u003eUse only on a stable and level surface\u003cbr\u003eAn unsuitable, too small or too large glass can cause it to slip or tip over\u003cbr\u003eA rubber band or cord can provide additional security, but cannot replace a sufficiently large support surface\u003cbr\u003eDo not continue to use damaged, cracked or severely deformed parts\u003cbr\u003eHandle glass containers carefully – glass can break\u003cbr\u003eRegularly check the water, plant and container for dirt\u003cbr\u003eDo not use as a drinking vessel, tableware or food storage container\u003c\/p\u003e\n\u003cp\u003e📦 SCOPE OF DELIVERY\u003cbr\u003eIncluded:\u003cbr\u003e1 × finished 3D-printed onion regrower in the selected color\u003c\/p\u003e\n\u003cp\u003eNot included:\u003cbr\u003eGlass or water container\u003cbr\u003eOnions or plants\u003cbr\u003eSeeds\u003cbr\u003eWater\u003cbr\u003eRubber band or cord\u003cbr\u003eDecoration\u003c\/p\u003e\n\u003cp\u003e🇩🇪 PRODUCTION\u003cbr\u003eThe item is produced by us using 3D printing in Hamburg, Germany.\u003cbr\u003eSince each item is produced individually, you are not receiving an industrial mass-produced product, but an individually produced 3D print.\u003c\/p\u003e\n\u003cp\u003eLEGAL NOTICE\u003cbr\u003eDecorative items, plants and glasses in product photos are for illustrative purposes only and are not included in the scope of delivery unless expressly stated as part of the offer.Please note the stated dimensions before ordering and check the suitability of your container.\u003cbr\u003eStatutory warranty rights apply.\u003c\/p\u003e\n\u003csection class=\"printchen-production\"\u003e\n\u003ch3\u003eProduction \u0026amp; Shipping\u003c\/h3\u003e\n\n\u003cp\u003eReady to ship: 1–2 business days.\u003c\/p\u003e\n\n\u003cp\u003eThe processing time applies before shipping. The additional delivery time depends on the destination country. Shipping per order: Germany €4.95, EU €14.90, USA €39.90 for packages up to 2 kg plus customs and import duties shown at checkout (DDP). Other non-EU destinations offered: €30.00; there, recipients pay applicable import duties and clearance fees upon import (DAP).\u003c\/p\u003e\n\n\u003c\/section\u003e","brand":"PRINTCHEN","offers":[{"title":"Black","offer_id":55455066063185,"sku":null,"price":9.9,"currency_code":"EUR","in_stock":true},{"title":"Blue","offer_id":55455066095953,"sku":null,"price":9.9,"currency_code":"EUR","in_stock":true},{"title":"Brown","offer_id":55455066128721,"sku":null,"price":9.9,"currency_code":"EUR","in_stock":true},{"title":"Green","offer_id":55455066161489,"sku":null,"price":9.9,"currency_code":"EUR","in_stock":true},{"title":"Gray","offer_id":55455066194257,"sku":null,"price":9.9,"currency_code":"EUR","in_stock":true},{"title":"Orange","offer_id":55455066227025,"sku":null,"price":9.9,"currency_code":"EUR","in_stock":true},{"title":"Pink","offer_id":55455066259793,"sku":null,"price":9.9,"currency_code":"EUR","in_stock":true},{"title":"Purple","offer_id":55455066292561,"sku":null,"price":9.9,"currency_code":"EUR","in_stock":true},{"title":"Red","offer_id":55455066325329,"sku":null,"price":9.9,"currency_code":"EUR","in_stock":true},{"title":"White","offer_id":55455066358097,"sku":null,"price":9.9,"currency_code":"EUR","in_stock":true},{"title":"Yellow","offer_id":55455066390865,"sku":null,"price":9.9,"currency_code":"EUR","in_stock":false},{"title":"Gold","offer_id":55455066423633,"sku":null,"price":9.9,"currency_code":"EUR","in_stock":false},{"title":"Silver","offer_id":55455066456401,"sku":null,"price":9.9,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1072\/2371\/2081\/files\/il_fullxfull.8419777088_jrhg.jpg?v=1792850533","url":"https:\/\/printchen.com\/en\/products\/zwiebel-regrower-fuer-glaeser-3d-gedruckter-hydroponik-halter-5-pflanzplaetze","provider":"PRINTCHEN","version":"1.0","type":"link"}